In other geometries, there may be no parallel lines, lines may not have a common point but they may have a common limit point at infinity, or they may just not intersect. You might be thinking about Projective Geometry where a "point at infinity" is added to every family of parallel lines and the set of all points at infinity is called the "line at infinity".
Typically, in formal geometry, points, lines, and planes are not defined. But postulates define their "baseline" behavior. The postulate that every geometry seems to agree on is the one that states. L1: Given two distinct points in a plane, there is exactly one line in that plane that contains them. DL1: Given two distinct lines in a plane, there is exactly one point in that plane that belongs to both lines.
Since Euclidean geometry contains parallel lines, DL2 is false. But Projective geometry accepts DL2 as a postulate. The big question is, "Does there exists a geometry that satisfies the postulates of Projective geometry?
The creation of such a geometry is really quite clever. You start with a Euclidean plane and you add points to it as follows. Pick any line in the plane. To that line and all lines parallel to it, you add one extra point, a point at infinity. This is a set thing. Adding this point to those lines means that those lines are no longer parallel. Define the set of all points at infinity to be the line at infinity.
The Projective plane is the Euclidian plane with all points at infinity and the line at infinity added to it. This particular Projective plane can be proved to satisfy DL2. Some lines will still intersect. Those that intersected at a point on the line that was removed will now be parallel. I would say if we stand next to each other and both walk due north, we eventually bump into each other near the north pole. Note, as several have commented, your premise is slightly off.
What you can convince your friend of is that any two 'straight lines' i. This section of Wikipedia worth a lot here:. In geometry, parallel lines are lines in a plane which do not meet; that is, two lines in a plane that do not intersect or touch each other at any point are said to be parallel. By extension, a line and a plane, or two planes, in three-dimensional Euclidean space that do not share a point are said to be parallel.
The expected answer would be that Because it is my name and that's it. Actually parallel lines cannot meet at a point or intersect because they are defined that way, if two lines will intersect then they will not remain parallel lines. When I was 16 or so I was bored trying to solve my math homework, so I played with a magnifying glass, and I noticed something interesting:.
If you look at the grid paper with a magnifying glass the lines remain parallel this is evident when they are more or less on the "top of the glass" , but all the lines meet at the edge of the glass. I went to my older brother, who was an engineering freshman at the time, and I told him that parallel lines can meet; but he replied that they cannot because it's an axiom.
Some years later I learned that there is a thing called non-Euclidean geometry. In his comment JackyChong has identified the preliminary problem. The definition of "parallel" is clear: lines that don't meet, so there are no parallel lines that meet.
The real question is the definition of "line". Geodesic is the most natural for geometry on the sphere. Then in this geometry there are no parallel lines. For projective geometry one definition is to add a "point at infinity" on each line, and then make the added points into a "line at infinity".
With these extra points and lines there are no parallel lines. Two that are parallel in the Euclidean plane share their point at infinity. The railroad track analogy helps here. In hyperbolic geometry there are multiple lines parallel to a given line through a point not on that line. If you get that far with the "someone who knows no mathematics" you can show him or her the Poincare model. You cannot convince any mathematician let alone your friend as it is false.
They can however grapple with the idea that for purely theoretical calculations we assume that 2 parallel lines can meet at a point in infinity. Should you wish to travel to infinity to prove this point then please send a postcard when you get there. Someone who knows basic mathematics can understand it easily since according to the definition of parallel lines Parallel lines: The lines those distance is constant are called parallel lines [see the topmost definition].
Hence, as coinciding lines touch each other implies parallel lines also touch. See the video here also. I would draw two parallel lines on a piece of paper. Then I would bring all the edges together into one point and I would show that the parallel lines would touch into that point. A sentence said to me by my mother when I was a kid and that I didn't understand at that time was:.
This statement and its explanation though art as suggested by Pedro Tamaroff in the comments and by showing how many statements and proofs are simplified if the person knows more math is a good introduction to the idea that thinking on parallel lines as lines meeting at infinity makes sense and can be useful. This, as you can also see in Yves Daoust's answer, can be seen whenever you look a straight road going to the horizon.
For example, see Wikimedia Commons for the source, The above image shows the reason why this conception was in the beginning a concept originated in art as it was really useful for representations of how we see things. An striking application of this can be seen in the Santa Maria presso San Satiro , where projective geometry was used emulating an absent space in a church.
However, there are many other examples. In usual geometry i. This can be the definition in the plane, but it is generally in higher dimensions a result derived from the definition of parallel lines as lines with the same direction. However, the reason why we can still make sense of the above statement about intersection at infinity is because affine geometry can be put inside projective geometry. When doing this, the points outside the affine space are called "points at infinity", parallel lines intersect at them and become the same as intersecting lines simplifying enormously many statements and proofs by permitting one to not distinguish cases.
An example can be Pappus's hexagon theorem. In conclusion, don't try to convince or show that parallel lines touch. Just try to explain the usefulness of thinking of parallel lines as lines that intersect at infinity. In the Renaissance, you have many examples of why this a useful statement from the point of view of representing reality and perspectives well; in mathematics, there are many examples of how this is really useful for simplifying statements and proofs in geometry.
In the flat Poincare disk model circle segment geodesic parallels meet tangentially only at infinitely distant points on the boundary of the "horizon" or boundary circle.
The lines can be seen to touch and move on the boundary seen in the Wiki link. An animation can be also found elsewhere semi-circles touch on x-axis while changing semi-circle size during movement.
One way to explain this is to think of the Euclidean plane as a picture of part of an ambient 3-dimensional world. This corresponds to how our vision actually works: light from the three-dimensional world is projected through the lens of an eyes onto the surface at the back of our eye.
In more detail: Place a plane anywhere in three-dimensional space as long as it doesn't pass through the origin. Call this the "picture plane". Any plane through the origin pierces the picture plane in exactly one line again, as long as the plane is not parallel to the picture plane. See below in which the picture plane is shown in blue. These are points and this line can be considered "at infinity", but really all this means is that they do not have images in the picture plane. You can experience this visually by holding your finger at arm's length in front of and a few inches above.
As you draw your arm closer while maintaining its height the location of your fingertip seems to get "higher" or "farther away" in your field of view, as your eyes have to strain more and more to see it.
Eventually when the fingertip is directly above the eye, the finger "disappears". It's not really gone, of course, but the "line of sight" from the fingertip to the lens of your eye is parallel to the retina, so that the fingertip cannot be seen.
Perceptually, the fingertip has receded "infinitely far away" in the picture plane -- but it is actually just a couple of inches away in 3-space. However , we all know what to do in that circumstance: turn your head! This corresponds to choosing a new picture plane with a different orientation. Now the point that was "at infinity" snaps into view and is revealed as an ordinary point in the new picture plane and at the same time points that were previously in view have no disappeared.
Now that we have this dictionary set up, let's think about what parallel lines in the picture plane are. Those planes are not parallel; they intersect, but the intersection is a line that does not pierce the picture plane. Of course if you choose a different picture plane, then the lines will no longer appear parallel, and their intersection will be plainly visible as a point in the new picture plane.
The final image below shows this. In that image, the orange and yellow planes are the same ones as before, but the blue picture plane has been moved and reoriented; the images of the two planes are now non-parallel lines. Visually or conceptually parallel lines converge over an extremely large distance, they NEVER intersect. The same thing can be said about ARCs if two arcs belong to two different circles with different radius lengths where both radii have the same starting position; another words concentric circles as in a bulls eye in a dart board or an archery board or if they are separated at a distance greater than the sum of their radii else if either of their radius are different lengths and the do not have the same center point then they can have an intersection point.
There may be cases where they don't have the same center point and still don't intersect. Of the next few images only the concentric circles and ellipses would be considered parallel, the rest either intersect or don't.
The only one of these that can be considered parallel are the Concentric Circles since each arc has the same distances of separation from another circle.
The Same can be applied for ellipses - Except they have two radii of different measure, one for the x-axis and one for the y-axis. I've noticed that many have used the terminology or the statement saying: Place a Point At Infinity either in their comments or in their answers. To me this is bothersome and I'm astonished by it. I think that it is impossible to place a point at infinity because Infinity is a concept and by definition it is considered to be a NAN Not A Number.
This concept of Infinity is applied in mathematics with the properties of functions and their limits. This is why we say that such a function or equation has a limit that approaches infinity. I think that the better or correct statement for this supposition would be: "If one is to place a point at the point of Convergence".
I say this because parallel lines will always be parallel and always have the same amount of separation at any given point on those lines. Now because of how our eyes work and how we interpret light signals visually parallel lines will Converge at an Extremely Large Distance. If one was to say place a point on the lines at a place that is approaching Infinity it would be a better statement than placing a point at infinity but even this is still incorrect.
Consider this: Imagine being out in the flat plains of the Midwestern part of the United states with very minimal hills where you can practically see the full horizon without being obscured: Now look down a railroad track that happens to be practically straight with very minimal bends.
With our eyes on an extremely clear day less moisture in the air and we can see down those tracks for approximately 20 - 40 miles. The best answers are voted up and rise to the top. Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? Learn more. Can parallel lines meet? Asked 8 years, 2 months ago.
Active 8 years, 2 months ago. Viewed 15k times. Gil Gil 3 3 gold badges 9 9 silver badges 14 14 bronze badges. Discusses what a parallel line. Show 5 more comments. Active Oldest Votes. Add a comment.
Upcoming Events. Featured on Meta. Now live: A fully responsive profile. The unofficial elections nomination post. Linked Related 7. Hot Network Questions.
0コメント